Close MenuProLine 195-322HC Angle Stop Valve 1/2" FIP X 3/8" Compression Brass Chrome
1/4-turn valve controls water flow to household plumbing fixtures. With a quarter turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home. Ball valve design. For use on any water supply shut off. Easy 1/4 furn operation.
ANGLE VALVE 1/2"CPVCX3/8 MULTI
BrassCraft 1/2 in. Nominal CPVC Inlet x 3/8 in. OD Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures - faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home.
Machined, 1-piece body construction for strength, durability and long-lasting performance
1/2 in. Nom CPVC x 3/8 in. OD Comp
Compatible with CPVC tubing
For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115? F. For those applications, use our KT series ball stops.
Multi-turn operation means water flow control with only a few turns of the handle
Easy-to-remove handle protects against accidental operation during rough-ins
One-piece shut-off mechanism provides smooth on-off operation
Brass, Oil Rubbed Bronze, and Satin Nickel finish
For indoor use
Temperature rating: 40? to 160?F
Pressure rating: 125 psi maximum
5/8" x 3/4" and 3/4" x 3/4 inch Straight Meter Coupling,
Features:
Style A Coupling is long body style with hex on barrel
Slip-on Meter Swivel Nut
5/8 inch Straight Ball Service Valve, 1/2 inch FNPT Inlet x 1/2 inch FNPT
Features:
Valve is non-directional and is watertight with flow in either direction Ends are integral or secured with adhesive to prevent unintentional disassembly
Hole for attaching handle is provided in tee-head
Sturdy stops allow 90 Deg motion and are enclosed and protected
Stainless steel reinforcing ring molded into seats
